Pro Tips to Keep Above-Ground Pool in Your Hotel Working Properly
If you are running a hotel business, you already know a pool can be a great addition to your collection of services. In most cases, an above ground pool is quite handy. But it can be every bit as troublesome, especially if the pool doesn’t work properly. So, what do you do in such a situation? Well, read on to find out how you can fix some of the common above ground pool problems.
Why is my pool not working well?
The very first challenge to resolving an above-ground pool problem is locating it. This might necessitate a bit of poking around or looking through the system to pinpoint the cause. But in most cases, the best way forward is looking for the tell-tale signs of a faulty pool.
Is the pump getting noisier?
The pump on an above ground pool has a motor fan for cooling its mechanics. This means the pump will produce more noise than the other types out there. Even so, if the pump is louder than expected, then you can consider checking what might be the problem.
You can place some cushioning under the pump to quiet it down. But if this doesn’t solve the problem, try checking the bearings. These parts can corrode due to high chemical concentration in the pool. You can consider replacing some parts or the whole pump if this is the issue.
Are the valve settings perfect?
Another problem you are likely to bump into is the lack of ideal level of circulation. If this is the case, the pool valves settings might be wrong. Some valves will need to open or close for the water to filter through. It all depends on the design of your pool. If you have concerns with the flow, you can call a technician to help check it out.
If there are some bubbles in there
Bubbles could result from a faulty pump. But they can also be a sign of a leakage in the underground piping system. Moreover, this could have resulted from a loose joint somewhere along the line. While this could be due to termites or ants damaging the system, you need to get it fixed immediately. It could also interfere with the normal operation of your pump or the flow of water into the pool.
Check the filters too
One of the almost certain problems you can encounter is clogging on the filters. This can take a toll on your pool's circulation performance. Anything from debris to algae as well as other contaminants could be the culprit. You can clean or replace the filter to solve your pool circulation problems.
Remember, cleaning your filters with chemicals can go a long way. But this won’t help clean the oil, grease or any dirt that is stuck in there. It would thus be wise to consider using a chemical filter cleaning product.
Beware of a suction leak
It might not sound serious, but if your pool pump can't seem to prime, the inefficiency could be all it takes to ruin your day. If your pump doesn't prime as it should, this could point to a suction leak. Further, it may indicate that a leak in any joint somewhere along the line. The other sign could be clogging in the piping system. Also, make sure to check on the impeller as well; debris is known for for sticking on this part, with some serious setbacks. But whichever the problem, you need to investigate it, or call in an expert to check it for you.
If the pump is switching on and off quite often
In some cases, the pump might be switching on and off without the interruption from anyone. Such a problem could be pointing to the voltage. If you notice the voltage could be the reason the pump can’t perform, you should consider switching it off at once. Ensure you have it checked by an electrician before reusing it.
Above ground pool maintenance tips
As it turns out, the best above-ground pools are the ones kept in the perfect condition. And the stakes are quite high here since different people will be using your hotel pool. Not to worry; here are some of the ways to keep your pool at its best.
Regular testing could make a difference
This comes in as one of the best ways to determine the healthy level of your pool’s water. The appearance of the water can be deceiving. Remember, most of the organisms that invade pools are microscopic. You need to avoid such instances as red eyes, hair discoloration or irritation. Thus, you should keep the water on your pool not only clean but also safe.
Test for the pH, calcium hardness, or the alkalinity level and adjust according to necessity. Too low levels could lead to bacteria and algae invasion. But too high levels could be unsafe too.
Salt water vs. chlorinated pool
Salt water has proven to be ideal for swimming pools. These ones need less monitoring. Better yet, they can generate the required levels of chlorine through the electrolysis process. This means you will need to do less weekly maintenance as you would with a chlorinated pool. But keep in mind that this option could cost you a bit more up front.
Keep it clean
One of the best ways to avoid clogging and settlement of debris on your pool is regular cleaning. Regular cleaning means you can keep your pool working at all times. As much as filters might help, ensure to do your part to keep the pool clean and running.
You may go for any of these applicable methods;
Vacuuming method utilizes suction cleaners connected to the skimmers.
Skimming can help you get rid of any floating debris, but a hand-held leaf skimmer can help in some cases.
Brushing method could also come in handy especially when cleaning the floor and walls.
Keep an eye on any potential dead spots
Ensuring an undisrupted circulation throughout the system is the way to go. You can keep an eye on several sections that usually slow down or block the water flow on your pool. Also, check other sections as the corners of the pool, the lower half, on the ladders and at the very center of the pool. These areas are notorious for algae, dirt, and debris concentration. So check them to ascertain they don’t slow things down or hinder the operation of your pool altogether.
All said and done, you can keep your pool operating at all times. But if the above-ground pool in your hotel doesn’t work properly, work on finding the cause of the problem right away. If you cannot do this yourself, it’s wise to call an expert and have it checked for any faulty parts. Although usually overlooked, the pool is among the most crucial aspects of a big hotel. Ensuring that your pool is working properly means keeping your customers happy always!